Products
C-11C VERTICAL STATOR COIL AUTO WINDING MACHINE
MODEL GMWC-11C
WIRE DIA. Ø 0.511 ~ 1.20mm * 6 wires parallel max.
STATOR STACK HEIGHT 120 ~ 300 mm
(R.P.M.) WINDING SPEED 750 rpm max.
EFFECTIVE DIA.OF ELYER WINDING 550mm
CONCENTRIC COILS 6 spans max.
EVERY STEP’S DISTANCE 30mm max.
NUMBER OF POLES FOR INDEX SINGLE OR 3 PHASE
MAX. NUMBER OF TURNS PER POLE MAX. 999 turns
CONTROL METHOD MICROPROCESSOR CONTROLLER C/W LCD TOUCH PANEL
DRIVE MOTOR 10HP AC SERVO MOTOR
PNEUMATIC POWER SUPPLY 4KG /c㎡ MIN
WEIGHT about 4000 KGS
POWER 3Ø, 220/380/415/440 VAC, 50/60 Hz, 12.5KVA
DIMENSION 2500(L)*1500(W)*3300(H)mm

Coil Winding Machine

Product Description

This machine is microcomputer-controlled. Winding and stripping down of coils are performed simultaneously, providing a rapid work cycle. Since manual removal of coils is obviated, an operator can handle two to three of these machines and corresponding number of coil inserting machines at a time. The machines are compactly designed and permit easy maintenance. When stator specifications are changed, only the replacement of one coil former is required and this can be quickly accomplished. Besides, this machine also has following advantages:
1.Synchronized winding-stripping mechanism enables any number of turns on only 30mm length of each step of the coil former to be obtained.
2.Index-table design makes it possible by winding and transfer tools changing simultaneously.
3.Parallel winding is possible with no wire damage. (optional)
4.Concentric winding can be achieved for 2 pole、4 pole、6 pole or 8 pole. 2 pole especially can produce outstanding effect.

Product Specifications
MODEL GMWC-11C
WIRE DIA. Ø 0.511 ~ 1.20mm * 6 wires parallel max.
STATOR STACK HEIGHT 120 ~ 300 mm
(R.P.M.) WINDING SPEED 750 rpm max.
EFFECTIVE DIA.OF ELYER WINDING 550mm
CONCENTRIC COILS 6 spans max.
EVERY STEP’S DISTANCE 30mm max.
NUMBER OF POLES FOR INDEX SINGLE OR 3 PHASE
MAX. NUMBER OF TURNS PER POLE MAX. 999 turns
CONTROL METHOD MICROPROCESSOR CONTROLLER C/W LCD TOUCH PANEL
DRIVE MOTOR 10HP AC SERVO MOTOR
PNEUMATIC POWER SUPPLY 4KG /c㎡ MIN
WEIGHT about 4000 KGS
POWER 3Ø, 220/380/415/440 VAC, 50/60 Hz, 12.5KVA
DIMENSION 2500(L)*1500(W)*3300(H)mm
CLOSE